Manual Configuration Of Infinity USB-1 & 2 Footpedals
This article will show how to manually enter the footpedal configuration information into the INI file when the "Configure a USB Footpedal fails" 1. With InScribe closed, navigate to the InScribe INI file: %appdata%\emdat\inscribe\emdat.ini 2. Edit the file, and add this text to the bottom: [Fo ...
- How To Configure InScribe For Some USB Foot Pedals Including The IN-PI-USB
If you are experiencing trouble with the functionality of your USB foot pedal while using Emdat InScribe, here is a potential fix to some common problems. Below you will find a list of some of the more common foot pedal issues such as: 1. InScribe will not play when you press play on the foot ...
- FAQ Sheet For Installation And Troubleshooting Of Start-Stop Foot Pedals For EMDAT InScribe
Open the Inscribe software. Configure as follows: Click on the "Options" menu in Inscribe® and check the option labeled "Separate Play/Pause Button". Click on the "Options" menu in InScribe® and select "Set Actions". When the window appears, set the "F9" key so that it is equal to ...
- Foot Pedals Without A Programming Mode
The following article is a possible solution to getting a non-programmable foot pedal to work with InScribe when all other solutions have failed. If you have an audio player program that your existing foot pedal works with, Inscribe can possibly be linked to it and use it. Keep in mind that the ...
- Foot Pedals With A Programming Mode
Emdat does not provide support directly for foot pedals. The foot pedal is an external hardware device and like other hardware devices such as a digital camera, printer, or a mouse each one is unique in it's own design and because of this, we recommend the transcriptionist contact the vendor ...
- USB Foot Pedals
With Inscribe Version 4.91.302 or higher we have included a configure USB foot pedal option. You will notice the selection under the options tab at the top of Inscribe. Please make sure your USB foot pedal is unplugged before starting the configuration process. After selecting the Configure ...
